HMS adds EtherNet/IP to Netbiter Remote Management Solution

By connecting a Netbiter EasyConnect 300-series gateway, users of EtherNet/IP-based equipment can carry out maintenance from any location. 

The Netbiter Remote Management solution has previously offered connectivity to Modbus devices, but now HMS can also offer direct, on board compatibility with EtherNet/IP. Via the LAN port on the Netbiter Gateway, users can connect via UCMM (UnConnected Message Manager) which is an acyclic messaging channel separate from the control loop messaging.

Features of Netbiter include:

• Users can configure EtherNet/IP devices remotely using their regular configuration software (RSLogix for example), log trends, monitor performance over time, and get alarm or event notifications whenever critical thresholds are reached.

• Users can connect an EtherNet/IP-based automation device to a Netbiter gateway via the LAN port. The Netbiter gateway sends data via Ethernet or the cellular network to the cloud-based data centre called Netbiter Argos. 

• Users access Netbiter Argos at www.netbiter.net using a regular web browser. They can also set up a secure tunnel to the remote machine or equipment which enables commissioning and debugging just as if they were on site.

• The new Netbiter release includes the ability to group and filter alarms, as well as free access to map functionality showing the exact location of each Netbiter gateway. 

Click on the video below to how Netbiter is used to remotely monitor water treatment systems.

For more information please click here or to buy online visit our website here. 

If you require more information please email info@routeco.com or call 0370 607 1000.

Simple and Low Maintenance Air to Air Heat Exchangers

Air to Air Heat Exchangers provide a simple, stand-alone, low maintenance and energy efficient means of cooling electrical enclosures. The effectiveness of Air to Air Heat Exchangers is fundamentally dependent upon the ambient air temperature and the required internal air temperature; not only must the former be lower than the latter but the available cooling output varies with the difference between them.

Air to Air Heat Exchangers have only two moving parts, an internal fan and an external fan, which draw air through separate circuits of a heat exchanger, ensuring that the ambient air, which may be aggressive, or any debris or contaminants present in it, are not permitted ingress into the enclosure.

The fans fitted in the Rittal Air to Air Heat Exchanger are maintenance-free and therefore maintenance is limited to cleaning between the lamellae of the aluminium heat exchanger, which may be removed both quickly and easily. Debris and coarse dust particles or oil vapour may be removed from the ambient air prior to the heat exchanger using either a polyurethane (PU) foam filter mat or a metallic filter mat respectively.

Since the Air to Air Heat Exchanger requires only an electrical supply and its energy consumption is limited to that of two fans, the energy efficiency of this cooling solution is greater than that of alternatives that utilise refrigerant.

Rittal Air to Air Heat Exchangers are available as either roof-mounted or wall-mounted variants and for either internal or external use and so there is a product suitable for most applications should the ambient air temperature and the required internal air temperature permit.

At Routeco we have a great, easy to use thermal label to help you determine the temperature of your products. By adhering the small label to an internal surface of your enclosure, you will be able to see how hot or cold it is from the temperature gauge. The thermal label is quick to stick with results appearing straight away and is suitable for all types of equipment.

To request your free thermal label please email info@routeco.com and one of our sales engineers will come and help select the best product for you.

To view stock availability and pricing of the Air to Air Heat Exchangers online click here.* 

*Please note not all products may be available to purchase online, please email info@routeco.com or call 0370 607 1000 for product enquiries.

Our time at the Automation Fair...

We had a great time attending the Automation Fair in Anaheim, California, with some of our customers.

During our time at the event we visited all the stands to make sure we got the most out of the two days. We felt the Connected Enterprise was fully explained and well delivered by Rockwell Automation.

Ourselves and our customers were impressed with Rockwell Automation's technical sessions, demonstrations and forums throughout our time at the fair. 

We also organised some activities outside the event for our customers to attend such as a vineyard tour for wine tasting and lunch, a trip to see the Anaheim Ducks vs Florida Panthers Ice Hockey Game, along with evenings spent in some great nearby restaurants.

Mike Stephenson, Glasgow's Area Sales Manager from Routeco, attended the event:

"I was very proud to represent Routeco, the Glasgow team and the customers at the event. It was a fantastic personal opportunity to visit the Automation Fair. Our organised events, my trip to the USS Midway with two clients, evening meals at Disney and Rockwell Automation’s evening at Mexican restaurant were superbly organised and attended by all my attendees."

The event was a unique opportunity to spend time with our customers to help build long term relationships and to ensure we are their partner of choice. 

For more information on Rockwell's Automation Fair please click here.

Thank you to all who attended and made the event a great success.

We are already looking forward to the next one!

Miniature Split Core Current Transformers

We have a wide range of miniature split core current transformers available from Crompton Instruments.

These offer a cost effective and efficient method by which current can be measured, without the need to break the conductor. Each current transformer is supplied with colour coded leads of up to 3 meters for connection to your monitoring device.

The MSC range of current transformers offer primary currents between 60-500A with 1 or 5A secondaries with class 1 accuracy performance (class 3 for 60-80A range).

Features of the current transformers include:
• Cost effective moulded case
• Ratio’s ranging from 60/1 to 500/5
• Fast cable clamp connection.
• Multiple fixing options
• Safety plug in shorting link

Benefits
• Faster installation
• Compact size profile applications

For further information please click here.

To view pricing, stock availability and to buy online, please visit our website.

If you require more information please email info@routeco.com or call 0370 607 1000.

Hardy's EASY 8™ Plug-In Modules

This low cost weighing solution with 16bits of resolution is designed to provide "just enough" functionality that strikes a balance between price, quality of weight reading and Hardy's reputation for high quality process measurement products.

The EASY 8 is a single channel plug-in module that reads, conditions and digitises load cell sensor and strain gage signals commonly found in process weighing applications.

Featuring vibration immunity based on Hardy's exclusive WAVERSAVER® technology, the HI 800-WS module increases production speed by eliminating the effects of unwanted machine and system vibration noise on the weighing system. This dramatically reduces the scale settling-time often required to output stable Gross and Net weight data.

With an output of 55 times/second of stable processed weight, It is an ideal and cost effective solution when used in conjunction with the Micro820 Programmable Logic Controller (PLC). Click here to find out more about the Allen-Bradley Micro820® PLC starter kits.

For further information on the EASY 8 plug-in modules click here.

If you require more information please email info@routeco.com or call 0370 607 1000.

Find the Right Service Contract for your Climate Control Equipment

By protecting your production processes and safeguarding your productivity with a service agreement, you can maintain the value of your equipment and systems, minimise downtime and allows costs to be managed over the long-term by selecting the right Rittal Service contract in partnership with Routeco.

The choice is yours to select from a wide-range of available standard service packages, including Basic, Comfort, Advanced and Full. These different packages offer different options for response to site time, number of planned maintenance visits, parts and labour cover, 24 hour round the clock telephone support and call out service. Should you need something specific, Rittal can design a tailor made contract to meet that need.

Rittal cooling products are always a good choice, demonstrating high quality and reliability in daily operation time and time again in harsh industrial environments around the world. Regular preventative maintenance leads to longer product service life and hence further increases the profitability of your equipment. Maintenance contracts are available in 1 year, 3 year and 5 year options, please refer to the table below for further details.

Features of the contract include:

For further information and to speak to one of our sales engineers please email info@routeco.com or call 0370 607 1000.

Let’s get started…. with the Allen-Bradley Micro820 PLC

The new Allen-Bradley Micro820® Programmable Logic Controller ‘Starter Kits’ are designed to introduce you to the features and benefits of using the Micro820 PLC. 

The Micro820 controller is ideal for controlling small standalone machines and remote automation applications that require flexible communications and I/O capabilities and can be configured using the Connected Components Workbench software.

Key features of the Micro820 include:

• The Micro820 20-pt controller has embedded Ethernet/IP and Serial ports and a microSD slot for data logging and recipe management.

• It can function as a remote terminal unit (RTU) for SCADA applications with support for Modbus over serial and Ethernet communications.

• Embedded support for 4 thermistor temperature inputs means it can function as a direct digital control (DDC) for building management systems (BMS).

• EtherNet/IP for Connected Components Workbench programming, RTU applications and HMI connectivity.

• 5KHz PWM Output for controlling solenoids and valves.

• Built-in Real Time Clock (RTC) with no battery required.

• microSD slot for program transfer, data logging and recipe management.

• Available with removable terminal blocks for easier wiring and installation.

• Supports up to two plug-in modules.

The ‘Starter Kit’ has been created to provide you with all of the basic hardware and software required to get you started with the Micro820 and includes the following parts:

• 1x 2080LC2020QWBR - Micro820 20pt I/O

• 1x 2080REMLCD – Micro820 LCD Display with Keypad

• 1x 2080PS120240VAC – Micro820 24v Power Supply

• 1x 1585JM8TBJM5 – Allen-Bradley 5M Ethernet Cable

• 1x Connected Components Workbench Software on DVD

This Micro820 starter kit has a special introductory price of £250.00 (only while stocks last).

For further information on the Micro820 please take a look at the online Virtual Brochure and to order your starter pack visit our website here.

If you require more information please email info@routeco.com or call 0370 607 1000.

Routeco's Low Voltage & Safety Workshop in the South East

We would like to invite you to our Low Voltage and Safety Workshop at the Routeco Dartford branch.

The seminar provides the perfect opportunity to discuss current projects and difficulties you may be experiencing relating to low voltage and safety.

Where: Unit 4, Orbital One, Green Street, Green Road, Darford, DA1 1QG 

When: Wednesday 10th December 2014

The session will start at 10.00am to 2.00pm with lunch provided.

The subjects covered in this seminar will be:

• EN ISO 14119 - new safety legislation New safety products
• Engineering tools
• Proposal works
• New Low Voltage Products

Who should attend?

• Factory Managers
• Control Engineers
• Project Managers
• Production/Operation Managers
• Engineering Managers
• Maintenance and support engineers
• Machinery Procurement/Purchasing
• Service Engineers
• Health and Safety Managers
• Anyone that has an involvement with Industrial Machine Safety

To book your place for this seminar or for more information please email info@routeco.com

Reducing the Risk of Arc Flash with Grace Engineered Products

Permanent Electrical Safety Devices (PESDs) are electrical components hardwired to a source of voltage(s) and installed into electrical systems. These enable engineers to validate zero electrical energy without being exposed to voltage. PESDs inherently minimise arc flash and electrical shock hazards because they reduce voltage exposure, provide voltage labelling on all sources and provide 24/7 visual and/or audible indication of voltage.

When engineers can determine a zero electrical energy state without any voltage exposure to themselves, their electrical safety program is safer. Verifying the proper operation of a meter and testing for absence of voltage before working on an electrical conductor (“test before touch”) for all practical purposes should always remain a habitual practice for engineers. The goal of PESDs is to ensure that when engineers “test before touch”, that they test only de-energised conductors.

Without PESDs, a failure of an isolator may go undetected until the engineer discovers live voltage after opening the control panel. This exact scenario is a common cause of arc flash. A direct short circuit may result from one mistake by the engineer while checking voltage.

Voltage detectors are a low-cost, redundant voltage verification tool that reduces arc flash risk, increases safety and adds productivity at a low installed cost.

We stock a wide range of “Safeside” voltage indicators and portals from Grace Engineered Products, who are a Rockwell Automation Encompass Partner. We also supply customised communications GracePorts and IR Windows that allow engineers to access control panels easily through closed doors.

Take a look at the video below on Grace Engineered Products at Automation Fair 2012.

For more information on voltage indicators click here.

To browse and purchase our range online please visit our website.

If you require more information please email info@routeco.com or call 0370 607 1000.

Introducing DURABOOK Laptops & Tablets: Perfect for Industrial Use

Selecting the right laptop or tablet can be a difficult task. You need to ensure the product you select is fit for purpose, and will survive in some of the harsh industrial environments that you may find yourself working in on a daily basis. Investing in the right product will assist with delivering your projects on time by limiting the need to waste time on fixing unnecessary computer related issues.

We are pleased to announce the arrival of the new Durabook S15H Semi-Rugged Laptop and the Durabook CA10 Semi-Rugged Tablet, which we believe offer the quality and reliability that you need at affordable and competitive prices.

Key Features of the S15H High-Performance Semi-Rugged Laptop include:

• Semi-Rugged, spill-proof keyboard, with drop protection from 2.5ft
• 15.6” Full HD (1920x1080) LCD Display
• Intel 4th Generation Core i5 M series processor, 500GB SATA, 4GB DDRIII, Windows 7 professional
• Bluetooth & Intel Centrino Wireless delivers superior connectivity
• SDXC Card Reader and Smart Card Reader
• 2x USB 3.0, 1x RJ45 Ethernet port, 1x RS232 Serial Port, 1x HDMI Port 
• DVD Super Multi Drive, 2.0 Mega Pixel Web Cam

Key Features of the CA10 High-Performance Semi-Rugged Tablet PC include:

• Semi-Rugged, IP43 Rated, with drop protection from 4ft
• Intel Atom 2600 CPU, 32GB SSD, 2GB DDRIII, Windows 7 professional
• 10.1” WXGA LCD display with resistive multi-touch screen (Sunlight Readable)
• Hot Swappable dual-battery design with up to 9 hours of power from a single charge
• Bluetooth & Intel Centrino Wireless delivers superior connectivity
• SD Card, Smart Card, RFID and Barcode Readers built in – ideal for payment terminal solutions
• 2x USB 2.0, 1x RJ45 Ethernet port, 1x RS232 Serial Port 

Watch the video below to see how Durabook test their laptops and tablets to make sure they survive under real world conditions.

For more information on Durabook and to view the full specification of these products please click here.

For stock availability and online pricing please visit our online store. 

If you require any further information or wish to discuss your IT requirements with our Product Specialist please contact Carl Wallace at carl.wallace@routeco.com

ProSoft introduces IEC 61850 Server Module for ControlLogix

ProSoft Technology has released two new energy solutions, the IEC 61850 Server Module for ControlLogix® and the EtherNet/IP™ to IEC 61850 Client Gateway.

The in-chassis module allows Rockwell Automation ControlLogix PACs to match Intelligent Electronic Devices (IEDs) on an IEC 61850 Ethernet network, enabling the PAC to exchange data with SCADA systems. 

In substation automation applications, the module enables non-smart electrical substation devices, such as transformers and switchgear, to present their data as IEC 61850 IEDs to the SCADA system. An Add-On Instruction in RSLogix™ 5000 allows for data transfer between the PAC and the module, simplifying data retrieval. 

Features of the solutions include:

• The EtherNet/IP™ to IEC 61850 gateway allows IEDs on an IEC 61850 network to communicate with PACs on an EtherNet/IP™ network.
• The gateway’s two independent Ethernet ports allow the protocols to be on different subnets. 
• The configuration software that comes with the gateway uses IED configuration files to import complex IEC 61850 data structures.
• The utility enables premier integration by creating AOIs that are imported into the Logix project, using the IEC 61850 tags so there is no need to retype them.

Take a look at the video below on ProSoft Technology's product overview.

For further information please click here.

To view stock availability and pricing please visit our online store.

If you require more information or to speak one of our Technical Specialists please email info@routeco.com or call 0370 607 1000.

Quick and Easy to Install Air and Water Heat Exchangers

By working in partnership with Rittal, we are able to bring you a range of air and water heat exchangers as part of the climate control range.

The air and water heat exchangers may be wall mounted and can be completely removed from the outside the of enclosure, without having to open the enclosure door, which results in both easier and quicker installation.

Units supplied with either the Basic controller or the eComfort controller show the enclosure internal temperature on the digital display. Those supplied with the eComfort controller also incorporate the Eco-mode control functionality, which was first used in Rittal's TopTherm Bluee cooling units.

The Eco-mode system employs an intelligent strategy to effectively target the use of energy, disabling the internal fan when the temperature inside the enclosure falls to 10 °C below the level desired. The fan is then enabled for a period of 30 seconds every 10 minutes to ensure the accuracy of the sensed temperature and ensure adequate air distribution before being permanently enabled when the temperature rises to 5 °C below the set point temperature.

At Routeco we have a great, easy to use thermal label to help you determine the temperature of your products. By adhering the small label to an internal surface of your enclosure, you will be able to see how hot or cold it is from the temperature gauge. The thermal label is quick to stick with results appearing straight away and is suitable for all types of equipment.

To request your free thermal label please email info@routeco.com and one of our sales engineers will come and help select the best product for you.

To view stock availability and pricing of the air and water heat exchangers online click here.* 

*Please note not all products may be available to purchase online, please email info@routeco.com or call 0370 607 1000 for product enquiries.

Brand new Plug-In Modules from Spectrum Controls

Introducing the new Spectrum Controls plug in modules for Allen-Bradley Micro820, Micro830 and Micro850 Series PLCs.

Spectrum control have launched their latest plug in modules which are the 2080sc-NTC 4 channel thermistor and the 2080sc-BAC BACnet communications plug in module.  


The NTC 4-channel thermistor boasts a range of excellent features including:
• 4 channels of thermistor/ resistance input
• NTC thermistor support
• Fully linearized sensor data
• 250 VDC channel-to-chassis ground isolation
• Easily configured using existing programming software
• Channel selectable for maximum speed with minimum noise 
• Factory calibrated for best possible accuracy
• Low power consumption

It offers functionality of dedicated analog input modules without compromising performance or price. For more information and detailed specs, click here.


Along with the launch of the NTC, comes the BACNet module for Allen-Bradley Micro820, Micro830 and Micro850 series. This boasts features such as:
• BACNet Compliant interface allowing you to turn your Micro800 series PLC into a BACNet Application Controller.
• Interface to BACNet serial and Ethernet Building Automation Networks
• Create your own HVAC, Lighting Access or Application Controller
• Easily configured using Spectrum configuration tool and CCW

The 2080 BACNet Plug-in has been validated to conform to the protocol insuring interoperability with a broad variety of building automation systems. For more information on the specs of the 2080sc BACnet click here.

To view stock availability and pricing please visit our online store here.

If you require more information please email info@routeco.com or call 0370 607 1000.

Routeco's Low Voltage & Safety Workshop in East Anglia

We would like to invite you to our Low Voltage and Safety Workshop in Peterborough, East Anglia. 

The seminar provides the perfect opportunity to discuss current projects and difficulties you may be experiencing relating to low voltage and safety.

Where: Routeco Business Park, Unit 3-4 Bakewell Road, Orton Southgate, Peterborough, PE2 6FS

When: Thursday 6th November 2014

The session will start at 9.30am to 1.00pm with lunch provided.

The subjects covered in this seminar will be:

• EN ISO 14119 - new safety legislation New safety products
• Engineering tools
• Proposal works
• New Low Voltage Products

Who should attend?

• Factory Managers
• Control Engineers
• Project Managers
• Production/Operation Managers
• Engineering Managers
• Maintenance and support engineers
• Machinery Procurement/Purchasing
• Service Engineers
• Health and Safety Managers
• Anyone that has an involvement with Industrial Machine Safety

To book your place for this seminar or for more information, email: carol.clasper@routeco.com or info@routeco.com

Routeco Introduces the Linux Development Module

ProSoft Technology: Where Automation Connects 
ProSoft Technology® specialise in the development of communication solutions compatible with the large automation suppliers’ controllers such as Rockwell Automation. The primary focus is to provide connectivity solutions that link dissimilar automation products. ProSoft Technology provides field proven connectivity and communication solutions that bridge between various automation products as seamlessly as if they were all from the same supplier.

We are excited to offer the Linux Development Module for ControlLogix® and CompactLogix™ processors from ProSoft Technology.

The module enables C/C++ developers to write custom applications for legacy or proprietary applications. The Linux Development Module is ideal for anyone who wants to create applications that interface with any device requiring custom Ethernet and serial communications, or execute custom functions.

Benefits:

• A complete Linux virtual machine, integrated development environment and a C API backplane interface are supplied on a development-kit DVD, allowing users to start coding immediately.
• The C/C++ Programmable Linux Module is ideal for anyone who wants to create applications that work with any devices requiring custom Ethernet and serial communications.
• The C/C++ Programmable Linux Module acts as a co-processor.
• Equipped with both Serial and Ethernet ports.
• Fast processing of complex code (400MHz ARM CPU)

FAQ

Why was the Linux Development Module for ControlLogix and CompactLogix created?
The Linux Development Module was created for both processors to allow users/developers to write a custom application (in C/C++ programming language) that interfaces to the Ethernet ports, serial ports, and for ControlLogix a storage media (Compact Flash) of the unit.

How does the module communicate with the ControlLogix and CompactLogix processors?
For both processors a backplane API is provided to allow the application to read and write.

Are there any tools to assist me in developing the module?
Yes. A Linux Virtual Machine comes on a separate development kit DVD. The Virtual Machine contains the popular Eclipse IDE and a preinstalled toolchain and libraries, as well as Ethernet & serial port example applications.

What are some typical applications for the modules?
1. When a ControlLogix or CompactLogix system needs to interface with a proprietary/custom protocol.
2. When complex functions or calculations are required that will not adversely affect the ControlLogix or CompactLogix processor scan time.

What determines my level of success with the modules?
The level of success with the LDM will be determined by the developers knowledge and experience with the:

1. C++ programming language
2. Embedded Linux environment
3. ControlLogix or CompactLogix system and RS Logix 5000/Studio 5000

What Linux distribution is used for both processors?
Timesys

For more information please download the datasheets:
ControlLogix® - MVI56E-LDM Datasheet
CompactLogix™ - MVI69E-LDM Datasheet

For a downloadable PowerPoint click here.

To purchase the ControlLogix® online click here, or here for CompactLogix™

If you require more information please email info@routeco.com or call 0370 607 1000.

An Introduction to Red Lion's ProducTVity Station

The ProducTVity™ Station from Red Lion is the only ready-to-deploy, self-contained solution for collecting, tracking, and displaying KPIs and real time production data on TVs, PC monitors, and even projectors. The ProducTVity™ Station is driven by a free of charge programming software, Crimson, to meet your requirements.

For more information please view the PowerPoint video below:

To download a copy of the PowerPoint please click here.

Read about the 'Seven Common KPI's for Production Monitoring' by downloading the white paper here.

For a free demonstration or further information please email info@routeco.com or call 0370 607 1000.

Need to upgrade your legacy Remote I/O™ system?

Components for legacy Remote I/O™ systems are becoming out dated as new control systems usually run on Ethernet networks. Running a new Ethernet network with switches and fibre cable can be a costly endeavour.

ProSoft Technology’s innovative migration gateways and Industrial Media Converters allow you to run Remote I/O™ and EtherNet/IP™ simultaneously over your existing Belden® 9463 Blue Hose® cable. You are now able to upgrade your legacy Remote I/O™ control systems in phases, eliminating the extended downtime required to upgrade your system.

The EtherNet/IP to Remote I/O or DH+ (AN-X2-AB-DHRIO) Gateway from ProSoft Technology is designed to help customers initiate a phased migration approach to replacing or upgrading legacy Remote I/O, HMI's or Drives. The AN-X2-AB-DHRIO gateway has multiple operating modes that are selected during configuration.

For more information click here to view a video or visit the manufacturers website.

To view stock availability and price please visit our online store.

If you wish to discuss your migration requirements with one of our team of Technical Specialists, please contact by email info@routeco.com or call 0370 607 1000.

Hardy Industrial weighing system delivers up to 30 channels of stable processes weight to PAC's and PLC's over a single fieldbus connection

The new HI 6600 series weight processing system from Hardy Process Solutions is EtherNet/IP® enabled and has a unique system architecture and modular design. This allows OEMs and System Integrators to configure between 1 and 30 channels of stable, processed weight over a single fieldbus connection, providing the lowest cost per channel of weight into a PAC, PLCs, or DCS system, greatly simplifying wiring and network addressing, all in an ultra-compact power efficient design.

The new HI 6600 series is designed to support process weighing applications such as inventory management, blending, filling and checking; and is especially well suited for batching systems, multi-head fillers and tank farms.

Fast, Stable, High Resolution Weight

The HI 6600 series delivers stable processed weight with a resolution of 1:10:000 and an update speed for up to 30 synchronized channels at 110 updates per second (processor, display and communications). The HI 6600 system enhances the productivity of process manufacturing systems where fast, precise weight-based controls are critical.

Hardy Process Solutions are a Rockwell Automation Encompass Partner and the HI 6600 offers easy integration to a Rockwell PAC, PLC, or DCS with a Rockwell Add-On-Profile compatible with RSLogix software. Other communications protocols, including Ethernet TCP/IP and UDP; Modbus TCP and RTU are also available and an embedded webserver in the Hardy Gateway Module allows access to any of the connected weight processing modules from anywhere on the user’s communications network.

Below is a 90 second video that shows how you calibrate weigh scales with up to hundreds of tons of capacity automatically and WITHOUT test weights... 

For further information please click here or download a product information sheet

To view stock availability and pricing please visit our website.

If you would like further technical information on the HI 6600 product or would like to speak to one of our technical specialists to arrange a site visit to discuss your Process Weighing applications then please contact your local Routeco Branch or email us at info@routeco.com.

Upcoming Events!

We have a lot of exciting events coming up this year that you don't want to miss out on! These include:

Glasgow's Machinery and Plant Safety Standards Seminar - 29th October

Southampton's Integrated Architecture Workshop - 4th November  Fully Booked

Glasgow's Connected Components Workshop - 5th November

Peterborough's Low Voltage and Safety Seminar - 6th November

Leed's Mirco 800 Workshop - 11th November

Peterlee's Machinery and Plant Safety Standards Seminar - 19th November Fully Booked 

Derby Safety Seminar - 26th November 

Cardiff Connected Components Workshop - 9th December 


We cover a range of subjects where these seminars and workshops will give you up to date information and legislation. To learn more about these events email info@routeco.com or call 0370 607 1000.

Range of TopTherm Chillers for Enclosure and Process Cooling

We have a vast range of Rittal Climate Control products available for your enclosures and the larger models from the TopTherm Chiller range utilise the renowned TS 8 frame so that it can be seamlessly integrated into a suite of enclosures. The unique modular construction allows for quick and easy maintenance.

TopTherm Chillers 1 - 6 kW

• Roof-mounted and stand-alone TopTherm chillers are both flexible and compact. 
• They provide for economical chilling of a central cooling water supply for air/water heat exchangers or the like. 
• With nano-coated condenser as standard. 

TopTherm Chillers Wall-mounted

• TopTherm chillers in the wall-mounted version are perfect for mounting on the enclosure door or side panel. 
• They provide for economical chilling of a central cooling water supply for air/water heat exchangers or the like. 
• With nano-coated condenser as standard. 

TopTherm Chillers 8 – 40 kW

• TopTherm chillers in a TS enclosure can be integrated perfectly into an enclosure suite. 
• With their small footprint, modular design and dual-frequency compatibility, they are extremely flexible. 
• In addition, they promise convenient servicing and high reliability thanks to protection against icing.

Chillers for IT cooling

• Developed for IT applications, i.e. to provide chilled water to LCPs and CRAC units in data centres, they may also be used to supply air/water heat exchangers and cool process liquids in large scale industrial applications
• Safety-relevant features such as redundant speed-controlled pumps, compressors or buffer stores.

Do you know the internal temperature of your control panels? Did you know that 57% of electrical components fail as a result of being either too hot or too cold? By selecting the right climate control products for your enclosure, electrical failures can be prevented by almost 80%. These thermal labels from Rittal are quick and easy to apply and include a temperature gauge giving you instant temperature readings.

To request your free thermal label email info@routeco.com and one of our sales engineers will come and help select the best product for you. 

For stock availability and pricing please visit our online store.

*Please note not all products may be available to purchase online, please email info@routeco.com or call 0370 607 1000 for product enquiries