Movement Detectors from Finder

Finder has expanded its 18 series range by adding three brand new application specific movement detectors.

Created precisely for sensing larger rectangular areas such as long corridors, the 18.41 surveys an area of up to 15 meters either side of the device. This provides a large detecting zone of 30 meters long, by 4 meters wide, from just a single unit.

Central to the 18.51 is an advanced lens and electronics system that achieves two detecting zones with different sensitivities. The central 4x4 meter zone responds to very small movements, for example, it can be used to detect the presence of a person working quietly at the workplace. However, with the extended 8x8 meter zone it will respond to normal movements. This product is particularly well suited for schools, offices and the workplace in general. 

The ‘Twin Mirror’ technology gives the 18.61 its remarkably wide viewing angle of 180 degrees. This is designed for fitting into new or existing wall boxes. Whilst the 18.61 can be installed in corridors along with the 18.41, it is ideally more suited to small spaces, for example bathrooms and passage areas. Fundamentally, the 18.61 can be installed as a direct replacement for a wall mounted light switch or push button.

All three models share the common characteristic of a wide 110 … 230 V AC power supply range, a 10A rated NO output contact, adjustable ambient light intervention threshold and a Light-Off delay adjustable from 12 to 35 minutes. 

Depending on the type of product, these can be installed on the ceiling, in suspended ceilings or in recessed or flush mounting boxes.

For more information on the Finder 18 series click here or to purchase from the 18 series range click here. 

For more information on these products email info@routeco.com or call 0370 607 1000.